Catégories

Achats en vrac

Si vous avez besoin de pilotes de plus de 100 pièces, n'hésitez pas à nous contacter en ligne (ou par courrier électronique: sales1@smartselectronics.com), nous vous fournirons le meilleur plan d'achat

DALI-2 D4i&PUSH Intelligent CC LED Driver 60W 160-1600mA (IP20)

SMT-DI060W160-D4PP-YT
DALI-2 Dimmable LED Driver
Smarts Power
  DALI-2 D4i dimmable led driver 60W. Universal input voltage range 100-277VAC, working efficiency up to 89%. Plastic shell, waterproof grade ip20, suitable for indoor dry space lighting project in...
Output Voltage*
Output Current*
Bulk Savings*
$71.76
$71.76

 

DALI-2 D4i dimmable led driver 60W. Universal input voltage range 100-277VAC, working efficiency up to 89%. Plastic shell, waterproof grade ip20, suitable for indoor dry space lighting project installation.

Model SMT-DI060W120-D4PP
Certificate UL / FCC / CE / RoHS / Reach / DALI / NFC
Output Rated current 120mA-1200mA (multiple current for choice freely by ProNFC)
DC Voltage 24V-93V
No-load voltage 98Vmax
Voltage Tolerance ±30mA(Rated output current of corresponding gear)
Voltage Regulation ≤0.5%
Rated power 60Wmax
Line Regulation <1%
Load Regulation <0.1%
Input Voltage Range 100-277VAC
Frequency Range 47 - 63Hz
Power Factor (Typ.)  PF≥0.94
No load power (Max) <1.5W
Standby power (Max) <0.5W
THD(Typ.) @ full load ≤15%
Efficiency @ full load ≥88%@120VAC 60Hz    ≥89%@230VAC 50HZ     ≥89%@277VAC 60HZ
AC Current (Max.) 0.75A
Inrush Current (Typ.) 66.0A, 220us@50%Ipeak277V    55.2A, 98us@50%Ipeak230V      28.7A, 204us@50%Ipeak120V
Leakage current <0.5mA
Protection Short Circuit Hiccup mode, recovers automatically after fault condition is removed
Over voltage Hiccup or constant power mode, reboots automatically after fault condition is removed
Over temperature Ambient temp. over 50±5℃, output current will be reduced to 50%;Ambient temp.Over 45±5℃,recovers automatically.
Ambient temp.over 60±5℃, output current will be reduced to 0%;Ambient temp.Over 45±5℃,recovers automatically.
Environment Working TEMP -40~+60℃ (see below derating curve)  Tc point temperature (Ta=40 ℃)89℃
Working Humidity 20 -90%RH  non-condensing  
Storage TEM.,Humidity -40 - +80℃,10 - 95% RH  
TEMP.coefficient ±0.03%/℃(0 - 50℃)
Vibration 10~500Hz, 2G 10min./1 cycle, period for 60min. each along X,Y,Z axes
Safety & EMC Safety standards EN61347-1   EN61347-2-13(EU)  &  UL8750   UL1310(US)
Withstand voltage I/P-O/P:3.75KVAC (EU)  &  I/P-O/P:1.8KVAC (US)
Strobe test standard Compliant with IEEE 1789 without strobe
THD test standard Compliant with IEC/EN 61000-3-2
lightning surge DM:2KV   CM:4KV
Isolation resistance I/P-O/P:100MΩ / 500VDC / 25℃ / 70%RH
EMC Emission EN55015   EN61000-3-2,3(EU)  &  FCC Part15 Subpart B; ANSI C63.4:2014(US)
Others Net Weight 0.3KG
Dimension 342*34.8*24.1mm (L*W*H)
Packing ****pcs /CTN
Notes 1. All parameters NOT specially mentioned are measured at rated load and 25℃of ambient temperature.
2. To extend the driver's using life, please reduce the loading at lower input voltage.

1. Input with Gray terminals 6P: Live Wire AC (L), Neutral Wire AC(N) .

2. Output LED SEC with Red/Black terminals 4P: output Positive (LED+), output negative (LED-). Connected to LED Lamps. 

3. Dimming Gray terminals 6P: when DALI dimming, signal dimming DA+, DA-/PUSH N and PUSHS L connected to the BUS of the DALI Master.

4. Please make sure you connect these correctly otherwise your product will not function correctly and could be damaged.

5. This product is also suitable for temperature control. It is recommended to use NTC for external temperature sensors, and the resistance value when triggering protection is between 1 Ω -20K Ω. 

Warm tips

  1. Suggested wire diameter: Input 0.2mm2-1.5mm2/AWG24-16.

Dimming Operation and Connecting Diagram 

Connect the DALI signal cable to the DALI bus of the controller (DALI Master), and after the controller scans and assigns an address, the power supply can be dimmed and controlled.

Attention:

The models with D4I and D4P in the model names all have DALI bus power supply function. If the bus power supply function is enabled (default off, can be enabled in NFC or upper computer), DALI dimming will come with a voltage of 16-20V, without the need for external power supply. If the power supply function is turned off, an additional DALI power supply (DALI Power) is required.

(For European Market)

(For North American Market )

 

Certificat de produit

Vous vous êtes enregistré avec succès!
Cet e-mail a été enregistré