Slim Size 0-10V Dimmable Driver 36W(IP67)
SMT-012-036VDSW
0-10V Dimmable Driver
SMARTS
The 277v small 24v dimmable led driver 36w 0 10v? waterproof that has passed ul, cul, and other certifications has an aluminum housing, which can adapt to outdoor humid working environments The wat...
The 277v small 24v dimmable led driver 36w 0 10v? waterproof that has passed ul, cul, and other certifications has an aluminum housing, which can adapt to outdoor humid working environments The waterproof grade is ip67,
model | SMT-012-036VDSW | SMT-024-036VDSW | |
Output | DC Voltage | 12VDC | 24VDC |
Voltage Accuracy | ±5% | ±5% | |
Rated current | 3.0Amp | 1.5Amp | |
Voltage Tolerance | ±0.5V | ||
Rated power | 36W | 36W | |
Voltage Regulation | ±0.5% | ||
Load Regulation | ±1% | ||
Input | Voltage Range | 100-277 VAC | |
Frequency Range | 47~63HZ | ||
Power Factor ( Typ.) | PF≧0.99/110V ; PF≧0.98/277V | ||
Full Load Efficiency(Typ.) | 85%@120VAC ,86%@277VAC | 86%@120VAC, 87%@277VAC | |
THD(Typ. ) @ full load | <10%@120VAC <15%@277VAC | ||
AC Current(Typ.) | 0.55A | ||
Inrush Current(Typ.) | 5A, 50%, 960us @120VAC; 13A, 50% , 1ms @277VAC | ||
Leakage current | <0.5mA | ||
Protection | Short Circuit | Hiccup mode, recovers automatically after fault condition is removed. | |
Over Loading | ≤120% shut down o/p voltage, re-power on to recover | ||
Over temperature | 100℃±10℃ shut down o/p voltage, automatically recover after cooling. | ||
Environment | Working TEMP. | -40~+60℃ | |
Working Humidity | 20~95%RH,non-condensing | ||
Storage TEM.,Humidity | -40~+80℃,10~95%RH | ||
TEMP.coefficient | ±0.03%/℃(0~50℃) | ||
Vibration | 10~500Hz, 5G 10min./1 cycle,period for 60min. each along X,Y,Z axes | ||
Safety&EMC | Safety standards | UL8750 +UL 1310, CAN/CSA-C22.2 No.250.13 | |
Withstand voltage | I/P-O/P:1.88KVAC | ||
Isolation resistance | I/P-O/P:100MΩ/500VDC/25℃/70%RH | ||
EMC EMISSION | FCC 47 CFR Part 15 ,Subpart B | ||
EMC IMMUNITY | Compliance to EN61000-4-2,3,4,5,6,,11, , Alight industry level | ||
Others | Weight | 0.35Kg | |
Size | 260*32*20mm (L*W*H) | ||
packing | 290*270*160mm, 50PCS/CTN | ||
Notes | 1. All parameters NOT specially mentioned are measured at 110VAC, 277VAC input ,Rated load and 25℃of ambient temperature. | ||
2. Tolerance:includes set us tolerance,line regulation and load regulation . | |||
3. The power supply is considered as a component that will be operated in combination with final Equipment. Since EMC performance will be affected by the complete installation, the final equipment manufactures must be-qualify EMC Directive on the complete installation again. |
?