0-10V Dimmable Driver 180W (Standard Size)
SMT-012-180VD
0-10V Dimmable LED Driver
SMARTS
Smarts 12v led transformer 180W have constant voltage? 0 10v dimmable waterproof performance. Input Voltage Range 100-130VAC, 170-265VAC, Good waterproof performance suitable for outdoor projects. ...
Smarts 12v led transformer 180W have constant voltage? 0 10v dimmable waterproof performance. Input Voltage Range 100-130VAC, 170-265VAC, Good waterproof performance suitable for outdoor projects. Three-year warranty.
| Model | SMT-012-180VD | SMT-024-180VD | |
| Output | DC Voltage | 12V | 24V |
| Voltage Accuracy | ±0.5V | ||
| Rated current | 0~15A | 0~7.5A | |
| Rated power | 180W | 180W | |
| Input | Voltage Range | 100-130VAC, 170-265VAC | |
| Frequency Range | 47~63HZ | ||
| Power Factor ( Typ.) | PF≧0.90/120V / PF≧0.90/220V | ||
| Full Load Efficiency(Typ.) | >88%(120V) / >88%(220V) | >88%(120V) / >88%(220V) | |
| AC Current(Typ.) | 2.066A@110VAC | 1.033A@220V | |
| Leakage current | ﹤0.89mA/120VAC / ﹤0.73mA/220VAC | ||
| Protection | Short Circuit | Protection type: Hiccup mode, recovers automatically after fault condition is removed | |
| Over voltage | ≦280VAC | ||
| Over temperature | 100℃±10℃ shut down o/p voltage, re-power on to recover | ||
| Environment | Working TEMP. | -40~+50℃ | |
| Working Humidity | 20~95%RH,non-condensing | ||
| Storage TEM.,Humidity | -40~+80℃,10~95%RH | ||
| TEMP.coefficient | ±0.03%/℃(0~50℃) | ||
| Vibration | 10~500Hz,5G 12min./1 cycle,period for 72min.each along X,Y,Z axes | ||
| Safety&EMC | Safety standards | EN61347-1 EN61347-2-13 IP66 | |
| Withstand voltage | I/P-O/P:3.75KVAC I/P-FG:1.88KVAC O/P-FG:0.5KVAC | ||
| Isolation resistance | I/P-O/P I/P-FG O/P-FG:100MΩ/500VDC/25℃/70%RH | ||
| EMC EMISSION | Compliance toEN55015,EN61000-3-2 (≧50%load) | ||
| EMC IMMUNITY | Compliance to EN61000-4-2,3,4,5,6,8,11,EN61547,A light industry level | ||
| Others | Weight | 1.8Kg | |
| Size | 255*80*53mm(L*W*H) | ||
| packing | 440*295*145mm/8pcs/CTN 265*98*55 mm for inner box | ||
| Notes | 1. All parameters NOT specially mentioned are measured at 110~ 220VAC input , rated load and 25℃of ambient temperature. | ||
| 2. Ripple& noise are measured at 20MHz of bandwidth by using a 12”twisted pair-wire terminated with a 0.1uf &47uf parallel capacitor. | |||
| 3. Tolerance:includes set us tolerance,line regulation and load regulation . | |||
