DALI Dimmable Driver 36W (Standard Size)
$90.60
-
$2,104.20
DALI Dimmable Driver 36W (Standard Size)
$90.60
-
$2,104.20
DALI Dimmable Driver 30W (Standard Size)
SMT-012-030VM
DALI Dimmable LED Driver
SMARTS
SMARTS VM series Dali is the premier new lighting control interface,24v Dali dimming led driver 2.5a 30w?With CE, ETL certification, it can meet the needs of major markets.
Model
SMT-012-030VM...
SMARTS VM series Dali is the premier new lighting control interface,24v Dali dimming led driver 2.5a 30w?With CE, ETL certification, it can meet the needs of major markets.
| Model | SMT-012-030VM | SMT-024-030VM | |
| output | DC Voltage | 12V | 24V |
| Voltage Tolerance | ±0.5V | ||
| Rated current | 0~2.5A | 0~1.25A | |
| Rated power | 30W | ||
| input | Voltage Range | 100~130VAC, 170~265VAC | |
| Frequency Range | 47~63HZ | ||
| Power Factor (Typ.) | PF≧0.90/110V / PF≧0.90/220V | ||
| Efficiency(Typ.) | >88% | >88% | |
| AC Current(Typ.) | 0.34A@110VAC | ||
| Leakage current | ﹤0.40mA/110VAC / ﹤0.50mA/220VAC | ||
| Protection | Short Circuit | Hiccup mode, recovers automatically after fault condition is removed | |
| Over Loading | ≦120% | ||
| Environment | Working TEMP. | -40~+60℃ | |
| Working Humidity | 20~90%RH, non-condensing | ||
| Storage TEM.,Humidity | -40~+80℃,10~95%RH | ||
| TEMP.coefficient | ±0.03%/℃(0~50℃) | ||
| Vibration | 10~500Hz,2G 10min./1 cycle,period for 60min. each along X,Y,Z axes | ||
| Safety&EMC | Safety standards | EN61347-1 EN61347-2-13 | |
| Withstand voltage | I/P-O/P:3.75KVAC | ||
| Isolation resistance | I/P-O/P:100MΩ/500VDC/25℃/70%RH | ||
| EMC EMISSION | EN55015,EN61000-3-2,3 (≧50%loading) | ||
| EMC IMMUNITY | EN61000-4-2,3,4,5,6,11(Surge 4KV) | ||
| Others | Net.Weight | 0.55Kg | |
| Size | 180*60*34mm(L*W*H) | ||
| packing | 355*215*215mm/20pcs/CTN | ||
| Notes | 1. All parameters NOT specially mentioned are measured at 110V / 220VAC input , rated load and 25℃of ambient temperature. | ||
| 2. Tolerance: includes set us tolerance, line regulation and load regulation . | |||
| 3. The power supply is considered as a component that will be operated in combination with final Equipment. Since EMC performance will be affected by the complete installation, the final equipment manufactures must be-qualify EMC Directive on the complete installation again | |||
¡ùInput with Live Wire(L) ?Neutral Wire (N)
¡ùOutput LED SEC output Positive(LED+),output negative(LED-).Connected to LED Lamps.
¡ùSignal Dimming (DA1), (DA2) DALI Non polar!Connected to the ?BUS of the DALI? ? Master.
¡ù When installing the LED driver and making input and output connections,?cross-section area of conductor for input and output terminal block:0.75mm2(cord type: H03VVH2-F or H03VV-F).
¡ùPlease make sure you connect these correctly otherwise your product will not? ? ? ? function correctly and could be damaged.
?
