DMX512 Dim Multi-Current Driver 10W (DIP Adjustment)
The dmx512 dimmable led driver has a built-in active PFC function, PF≥0.95, constant current operating mode, working efficiency up to 76%, plastic housing design, suitable for indoor lighting projects, with a 7-year warranty
- Input with ULO-126 terminals 3P: Live Wire AC (L), Neutral Wire AC(N)
- Output LED SEC with ULO-381terminals 2P: output Positive (LED+), output negative (LED-). Connected to LED Lamps.
- Suggested wire diameter: Input 0.75-2mm2; Output:0.5-2mm2.
Note: Please make sure you connect these correctly otherwise your product will not function correctly and could be damaged.
■ Dimming Operation and Connecting Diagram
DMX512 dimming:
- Input terminal with 3P; Live Wire(L) , Neutral Wire (N) . Note: vacant for middle terminal
- Outputterminals with 5P; LED SEC positive (LED+), LED negative (LED-). Connected to LED light;
- Common anode design 3P for DIM (DMX512) dimming;
- Please make sure you connect these correctly ,otherwise your product will not workcorrectly and could be damage
■ DMX512 address setting Operation
- The default address for our DMX LED driver is 001.
- Address settings device:
- Address settings:
① RDM setting address:
Set the address by the RDM device. For detailed operation, please refer to RDM device instruction manual.
② NFC setting address:
The DMX address can be read and written by a mobile with NFC APP or NFC handheld device (NFC read & write device: NFC-RW) by close to the NFC signal area of the DMX512 driver.
■ Setting Operation Steps:
Simple operation about DMX512 address reset and adjusting output voltage slighting by a mobile with NFC APP or NFC handheld device (NFC read & write device: NFC-RW)
