Waterproof Constant Current LED Driver 10W
SMT-014-0700CW
Non-dimmable LED Driver
SMARTS
SMT-014-0700CW is a 700ma waterproof constant current 10W led power supply with a size of only 83*30*20mm. It is convenient and quick to install. It is suitable for installation in humid and narrow...
SMT-014-0700CW is a 700ma waterproof constant current 10W led power supply with a size of only 83*30*20mm. It is convenient and quick to install. It is suitable for installation in humid and narrow places such as bathrooms. It has a two-year warranty and can well protect 10w LED downlight life
| MODEL | SMT-020-0300CW | SMT-018-0350CW | SMT-014-0700CW | |
| OUTPUT | DC VOLTAGE | 14~20V | 10~18V | 7-14V |
| RATED CURRENT | 300mA | 350mA | 700mA | |
| CURRENT RANGE | 0-300MA | 0-350mA | 0-700mA | |
| RATED POWER | 6W | 6W | 10W | |
| RIPPLE&NOISE(max) | 50mV | 50mV | 50mV | |
| VOLTAGE TOLERANCE | <4V | <4V | <4V | |
| SETUP RISE TIME | 80ms/110VAC, 220VAC | |||
| HOLD UP TIME(Typ.) | 60ms/110VAC,220VAC | |||
| INPUT | VOLTAGE RANGE | 100~265VAC | ||
| FREQUENCY RANGE | 47~63Hz | |||
| POWER FACTOR(Typ.) | ||||
| EFFICIENCY(Typ.) | ﹥84% | ﹥84% | ﹥84% | |
| AC CURRENT(Typ.) | 0.25A/110V,220VAC | 0.5A/110V,220VAC | ||
| INRUSH CURRENT (Typ.) | COLD START 30A/110V,220VAC | |||
| PROTECTION | Short circuit | Protection type:Hiccpe mode,recovers automatically after condition is removed | ||
| Protection | overload, overheat, overvoltage | |||
| Over temperature | Protection type:Shut down o/p voltage,re-power on to removed | |||
| ENVIRONMENT | WORKING TEMP. | -10~+40℃ (Refer to output load derating curve) | ||
| WORKING HUMIDITY | 20~99% RH non-condensing(Waterproof) | |||
| STORAGE TEMP.,HUMIDITY | -40~+80℃,10~99%RH | |||
| SAFETY&EMC | SAFETY STANDARDS | EN61347-1;EN61347-2-13;SELV;IP67 | ||
| WITHSTAND VOLTAGE | I/P-O/P:2KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC | |||
| EMC Test Standards | EN55022 Class B;EN61547;EN61000-4-5 | |||
| EN61000-3-3 | ||||
| NOTE | 1.All parameters NOT specially mentoned are measured at 100~240VAC input,rated load and 25℃ of ambient temperature. | |||
| 2.Ripple&noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf&10uf parallel capacitor. | ||||
| 3.Tolerance:includes set up tolerance,line regulation and load regulation. | ||||
