Waterproof Constant Current LED Driver 28W
$40.00
-
$40.00
Waterproof Constant Current LED Driver 65W
$47.20
-
$991.20
Waterproof Constant Current LED Driver 28W
$40.00
-
$40.00
Waterproof Constant Current LED Driver 65W
$47.20
-
$991.20
Waterproof Constant Current LED Driver 10W
SMT-030-0700CW
Non-dimmable LED Driver
SMARTS
Such led driver 10W is constant current type with CE/ROHS approval for all over world. The output current is 700mA and the output is 7-14volt. 2 years warranty is guaranteed. The compact design mak...
Such led driver 10W is constant current type with CE/ROHS approval for all over world. The output current is 700mA and the output is 7-14volt. 2 years warranty is guaranteed. The compact design makes it popular in narrow space.
| MODEL | SMT-040-0500CW | SMT-060-0350CW | SMT-030-0700CW | SMT-036-0700CW | |
| OUTPUT | DC VOLTAGE | <45V | <45V | <45V | <45V |
| RATED CURRENT | 500mA | 350mA | 700mA | 700mA | |
| VOLTAGE RANGE | 25-40V | 30-60V | 7-14V | 25-36V | |
| RATED POWER | 20W | 20W | 10W | 25W | |
| RIPPLE&NOISE(max) | |||||
| CURRENT TOLERANCE | ±5% | ±5% | ±5% | ±5% | |
| LINE REGULATION | ±5% | ±5% | ±5% | ±5% | |
| LOAD REGULATION | ±5% | ±5% | ±5% | ±5% | |
| INPUT | VOLTAGE RANGE | 90-265VAC | 90-265VAC | 90-265VAC | 90-265VAC |
| FREQUENCY RANGE | 47-63Hz | 47-63Hz | 47-63Hz | 47-63Hz | |
| POWER FACTOR(Typ.) | ﹥0.92 | ﹥0.93 | ﹥0.92 | ﹥0.92 | |
| EFFICIENCY(Typ.) | ﹥86% | ﹥86% | ﹥85% | ﹥86% | |
| AC CURRENT(Typ.) | 0.15A/110V,220VAC | 0.15A/110V, 220VAC | 0.15A/110V, 220VAC | ||
| PROTECTION | SHORT CIRCUIT | Protection type:Hiccpe mode,recovers automatically after condition is removed | |||
| OVER CURRENT | Protection | ||||
| OVER HEAT | Protection | ||||
| ENVIRONMENT | WORKING TEMP. | -30~+50℃ (Refer to output load derating curve) | |||
| WORKING HUMIDITY | 20~99% RH non-condensing | ||||
| STORAGE TEMP.,HUMIDITY | -40~+80℃,10~99%RH,IP67 | ||||
| SAFETY&EMC | SAFETY STANDARDS | EN61347-1;EN61347-2-13;SELV | |||
| WITHSTAND VOLTAGE | I/P-O/P:2KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC | ||||
| EMC Test Standards | EN55015;EN61000-3-2;EN61000-3-3;EN61547;EN61000-4-2,3,4,5,6,8,11; | ||||
| NOTE | 1.All parameters NOT specially mentoned are measured at 110V, 220VAC input,rated load and 25℃ of ambient temperature. | ||||
| 2.Ripple&noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf&10uf parallel capacitor. | |||||
| 3.Tolerance:includes set up tolerance,line regulation and load regulation. | |||||
