UL Non-Dimmable Driver 300W
$196.00
-
$4,116.00
UL Class 2 Non-Dimmable Driver 300W
$196.00
-
$4,116.00
UL Non-Dimmable Driver 300W
$196.00
-
$4,116.00
UL Class 2 Non-Dimmable Driver 300W
$196.00
-
$4,116.00
UL Class 2 Non-Dimmable Driver 180W
SMT-012-180VWN2
Non-dimmable LED Driver
SMARTS
277Vac led street light waterproof driver 180W Aluminum metal housing IP67, LED driver 12vdc has better heat dissipation than done LED street light Driver 180W, and has high compatibility. Class p ...
277Vac led street light waterproof driver 180W Aluminum metal housing IP67, LED driver 12vdc has better heat dissipation than done LED street light Driver 180W, and has high compatibility. Class p can directly replace most brand LED power supplies.
| model | SMT-012-180VWN2 | SMT-024-192VWN2 | |
| Output | DC Voltage | 12V | 24V |
| Voltage Accuracy | ±0.5V | ±0.5V | |
| Rated current | 15.0A (3*5A) | 8.0A (2*4A) | |
| Rated power | 180W | 192W | |
| Voltage Tolerance | ±0.5V | ±0.5V | |
| Load Regulation | ±1% | ±1% | |
| Voltage Regulation | ±0.5% | ±0.5% | |
| Input | Voltage Range | 100-277VAC | |
| Frequency Range | 47-63Hz | ||
| Power Factor(Typ.)@ full load | 0.99@120VAC 0.94@277VAC | 0.99@120VAC 0.94@277VAC | |
| THD(Typ.)@ full load | <20% | <20% | |
| Efficiency(Typ.)@ full load | 87%@120V 89%@277VAC | 88%@120V 90%@277VAC | |
| AC Current(Max.) | 2.2A@100VAC | 2.3A@100VAC | |
| Inrush Current (Typ.) | 19A ,50%,1.3ms @120VAC ; 38A,50%,960us @277VAC 12.4A (twidth=430us) @277VAC | ||
| Leakage current | <0.50mA | ||
| Protection | Short Circuit | shut down o/p voltage, re-power on to recover after fault condition is removed | |
| Over Loading | ≤120% Hiccup mode ,recovers automatically after fault condition is removed | ||
| Over temperature | 100℃±10℃ shut down o/p voltage, automatically recover after cooling. | ||
| Environment | Working TEMP. | -40~+60℃ (see below derating curve) | |
| Working Humidity | 20~90%RH, non-condensing | ||
| Storage TEMP. Humidity | -40~+80℃,10~95%RH | ||
| TEMP .coefficient | ±0.03%/℃(0~50℃) | ||
| Vibration | 10~500Hz, 5G 10min./1 cycle,period for 60min. each along X,Y,Z axes | ||
| Safety&EMC | Safety standards | UL8750+UL1310 | |
| Withstand voltage | I/P-O/P:1.88KVAC | ||
| Isolation resistance | I/P-O/P:100MΩ/500VDC/25℃/70%RH | ||
| EMC EMISSION | FCC 47 CFR Part 15 ,Subpart B | ||
| Others | Net Weight | 1.90Kg | |
| Size | 276*78*47mm (L*W*H) | ||
| packing | 329*279*176mm , 10PCS/ctn | ||
| Notes | 1. All parameters if NOT specially mentioned are measured at 120VAC input , rated load and 25℃of ambient temperature. | ||
| 2. To extend the driver's using life ,please reduce the loading at lower input voltage. | |||
¡öInput wire 18AWG Black and White to be connected to AC L and N ,Green wire go ground,
¡öOutput cable 2*16AWG,Red" (+) to LED Positive side (+) , "Black"(-) to LED Negative side (-).
Note: Three groups output cables for SMT-012-180VWN2 and two groups for SMT-024-192VWN2
¡öPlease make sure your connect these correctly otherwise your product will not function correctly and could be damaged.
