Waterproof LED Driver 48W
SMT-012-048VW
Non-dimmable LED Driver
SMARTS
led strip driver 12v 48W through ETL,CE,RoHS Certificationr, output 12/24Vdc 2-4Amp meet with Canada and USA market.Waterproof LED power supply 48W Can match superior lighting used in Storage areas...
led strip driver 12v 48W through ETL,CE,RoHS Certificationr, output 12/24Vdc 2-4Amp meet with Canada and USA market.Waterproof LED power supply 48W Can match superior lighting used in Storage areas, garages, smallwarehouses, & shops.
| MODEL | SMT-012-048VW | SMT-024-048VW | |
| OUTPUT | DC VOLTAGE | 12V | 24V |
| RATED CURRENT | 4.0A | 2.0A | |
| CURRENT RANGE | 0~4.0A | 0~2.0A | |
| RATED POWER | 48W | 48W | |
| RIPPLE&NOISE(max) | 120mVp-p | 200mVp-p | |
| voltage TOLERANCE | 12V±5% | 24V±5% | |
| SETUP RISE TIME | 60ms/110VAC | 60ms/110VAC | |
| HOLD UP TIME(Typ.) | 20ms/230VAC | 10ms/110VAC | |
| INPUT | VOLTAGE RANGE | 100~265Vac | 100~265Vac |
| FREQUENCY RANGE | 50~60Hz | 50~60Hz | |
| POWER FACTOR(Typ.) | |||
| EFFICIENCY(Typ.) | ﹥83% | ﹥84% | |
| AC CURRENT(Typ.) | 0.45A/110V, 0.25A/220V | 0.45A/110V,0.25A/220V | |
| INRUSH CURRENT (Typ.) | COLD START 30A/110~220VAC | ||
| PROTECTION | Short circuit | Protection type:recovers automatically after condition is removed | |
| Overload | overload protected@110%~150% above peak rating | ||
| Over temperature | Protection type:Shut down o/p voltage,re-power on to removed | ||
| ENVIRONMENT | WORKING TEMP. | -25~+50℃ (Refer to output load derating curve) | |
| WORKING HUMIDITY | 20~90% RH non condensing, refer to IP67 | ||
| Vibration | 10~500Hz,2G 10min/1cycle,period for 60min,each along X,Y,Z axes | ||
| STORAGE TEMP.,HUMIDITY | -40~+80℃,10~99%RH | ||
| SAFETY&EMC | SAFETY STANDARDS | IP67 approved; Design refer to LVD EN61347-2-13:2005,EN61347-1:2008 | |
| WITHSTAND VOLTAGE | I/P-O/P:3KVAC, I/P-COVER: 3KVAC , O/P-COVER:500VAC | ||
| EMC Test Standards | EN55015:2006/A2:2009,EN61000-3-2:2006/A2:2009,EN61000-3-3:20 | ||
| MTBF | 50KHours (25℃) | ||
| NOTE | 1.All parameters NOT specially mentoned are measured at 110VAC, 220VAC input,rated load and 25℃ of ambient temperature. | ||
| 2.Ripple&noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf&10uf parallel capacitor. | |||
| 3.Tolerance:includes set up tolerance,line regulation and load regulation. | |||
