5 in 1 Class 2 Dim LED Driver 180W(Standard Size)
SMT-012-180VTD52
5 in 1 Dimmable LED Driver
SMARTS
This phase dimming led driver has high power factor up to 0.99 and can be paired with Relative Junction Box. It can perfect compatibility with most dimmers and achieve 0-100% dimming range.
mod...
This phase dimming led driver has high power factor up to 0.99 and can be paired with Relative Junction Box. It can perfect compatibility with most dimmers and achieve 0-100% dimming range.
| model | SMT-012-180VTD52 | SMT-024-192VTD52 | |
| Output | DC Voltage | 12V | 24V |
| Voltage Accuracy | ±0.5V | ±0.5V | |
| Rated current | 15.0A (3*5A) | 8.0A (2*4A) | |
| Rated power | 180W (3*60W) | 192W (2*96W) | |
| Voltage Tolerance | ±0.5V | ±0.5V | |
| Load Regulation | ±1% | ±1% | |
| Voltage Regulation | ±0.5% | ±0.5% | |
| Input | Voltage Range | 100~277V AC | |
| Frequency Range | 47~63HZ | ||
| THD(Typ.) @full load | <20% | ||
| Power Factor ( Typ.) | 0.99@120VAC 0.94@277VAC | 0.99@120VAC 0.94@277VAC | |
| Full Load Efficiency(Typ.) | 86%@120V 88%@277VAC | 87%@120V 89%@277VAC | |
| AC Current(Typ.) | 2.2A@100VAC | 2.3A@100VAC | |
| Inrush Current (Typ.) | 19A ,50%,1.3ms @120VAC ; 38A,50%,960us @277VAC | ||
| Leakage current | ﹤0.50mA | ||
| Protection | Short Circuit | shut down o/p voltage, re-power on to recover after fault condition is removed | |
| Over temperature | 100℃±10℃ shut down o/p voltage, automatically recover after cooling. | ||
| Over Loading | ≤120% constant current limiting, auto-recovery | ||
| Over voltage | ≦140VAC(90~135V) , ≦270VAC(170~265V) | ||
| Environment | Working TEMP. | -40~+60℃ | |
| Working Humidity | 20~90%RH,non-condensing | ||
| Storage TEM.,Humidity | -40~+80℃,10~95%RH | ||
| TEMP.coefficient | ±0.03%/℃(0~50℃) | ||
| Vibration | 10~500Hz,2G 10min./1 cycle,period for 60min. each along X,Y,Z axes | ||
| Safety&EMC | Safety standards | UL8750+UL1310 | |
| Withstand voltage | I/P-O/P:1.88KVAC | ||
| Isolation resistance | I/P-O/P:100MΩ/500VDC/25℃/70%RH | ||
| EMC EMISSION | FCC 47 CFR Part 15 ,Subpart B | ||
| EMC IMMUNITY | Compliance to EN55015; EN61000-4-2,3,4,5,6,8,11,EN61547 Alight industry level (surge4KV) | ||
| Others | Net Weight | 1.7Kg | |
| Size | 278*78*47mm (L*W*H) | ||
| packing | 329*279*176mm , 10PCS/ctn | ||
| Notes | 1. All parameters NOT specially mentioned are measured at 110V/277VAC input , rated load and 25℃of ambient temperature. | ||
| 2. Tolerance:includes set us tolerance,line regulation and load regulation . | |||
- Input wire 18AWG Black and White to be connected to AC L and N ,Green wire go ground,
- Output cable 2*16AWG,Red" (+) to LED Positive side (+) , "Black"(-) to LED Negative side (-).
- Three groups output cables. of 12Vdc 180W? and two groups of 24Vdc?? 192W
- Dimming cable 2*18AWG,DIM (+) Purple to 0/1-10V dimmer signal(+ ),DIM (-) Grey to 0/1-10V dimmer signal (-)
- Please DO NOT connect ¡°DIM-¡° to ¡°LED-¡°, ¡°DIM+¡± to ¡° LED+¡± ,or other incorrect connection.
- Please make sure your connect these correctly otherwise your product will not function correctly and could be damaged.
¡ö?Connecting Diagram
Using TRIAC/Phase cut dimming
1.The Pulse-Width Modulation (PWM) of output voltage can be adjusted through input terminal of the AC phase line(L) by connection a phase /Triac dimmer of lighting system.
2.Work with forward phase /leading edge ,MLV and?reverse phase /trailing edge ,ELV,TRIAC dimmers.
3.Please try to use dimmers with power at least 1.5 times as the output power of the driver.
?Using 0-10/1-10V dimming
?
