DALI Dimmable Driver 45W (Standard Size)
This Dali dimmable 45W 24V led driver Passed CE ETL FCC ROHS certification. The design concept of ip20's plastic shell is to install in a dry indoor environment, and the compact size allows it to be installed in a small space. Its smooth dimming mode can be well matched with sunco lighting's 45WLED floodlight
| Model | SMT-012-045VM | SMT-024-045VM | |
| output | DC Voltage | 12V | 24V |
| Voltage Tolerance | ±0.5V | ||
| Rated current | 0~3.75A | 0~1.87A | |
| Rated power | 45W | ||
| input | Voltage Range | 100-130VAC / 170-265VAC | |
| Frequency Range | 47~63HZ | ||
| Power Factor (Typ.) | PF≧0.90/110V / PF≧0.90/220V | ||
| Efficiency(Typ.) | >88% | >88% | |
| AC Current(Typ.) | 0.52A@110VAC | ||
| Leakage current | ﹤0.60mA/110VAC / ﹤0.70mA/220VAC | ||
| Protection | Short Circuit | Hiccup mode, recovers automatically after fault condition is removed | |
| Over Loading | ≦120% | ||
| Environment | Working TEMP. | -40~+60℃ | |
| Working Humidity | 20~90%RH, non-condensing | ||
| Storage TEM.,Humidity | -40~+80℃,10~95%RH | ||
| TEMP.coefficient | ±0.03%/℃(0~50℃) | ||
| Vibration | 10~500Hz,2G 10min./1 cycle,period for 60min. each along X,Y,Z axes | ||
| Safety&EMC | Safety standards | EN61347-1 EN61347-2-13 | |
| Withstand voltage | I/P-O/P:3.75KVAC | ||
| Isolation resistance | I/P-O/P:100MΩ/500VDC/25℃/70%RH | ||
| EMC EMISSION | EN55015,EN61000-3-2,3 (≧50%loading) | ||
| EMC IMMUNITY | EN61000-4-2,3,4,5,6,11(Surge 4KV) | ||
| Others | Net.Weight | 0.55Kg | |
| Size | 180*60*34mm(L*W*H) | ||
| packing | 355*215*215mm/20pcs/CTN | ||
| Notes | 1. All parameters NOT specially mentioned are measured at 110V / 220VAC input , rated loadand 25℃ of ambient temperature. | ||
| 2. Tolerance: includes set us tolerance, line regulation and load regulation . | |||
| 3. The power supply is considered as a component that will be operated in combination with final Equipment. Since EMC performance will be affected by the complete installation, the final equipment manufactures must be-qualify EMC Directive on the complete installation again | |||
¡ùInput with Live Wire(L) ?Neutral Wire (N)
¡ùOutput LED SEC output Positive(LED+),output negative(LED-).Connected to LED Lamps.
¡ùSignal Dimming (DA1), (DA2) DALI Non polar!Connected to the ?BUS of the DALI? ? Master.
¡ù When installing the LED driver and making input and output connections,?cross-section area of conductor for input and output terminal block:0.75mm2(cord type: H03VVH2-F or H03VV-F).
¡ùPlease make sure you connect these correctly otherwise your product will not? ? ? ? function correctly and could be damaged.
?
