Ultra-thin CV Non-Dimmable LED Driver 42W
SMT-012-042VWP
Non-dimmable LED Driver
SMARTS
The thin led driver 42w has smaller size and only 18.4mm height. Shows good compatibility with constant voltage LED lights, like LED strips. Led mirrors and so on.
MODEL
SMT-012-042VWP
SMT-024...
The thin led driver 42w has smaller size and only 18.4mm height. Shows good compatibility with constant voltage LED lights, like LED strips. Led mirrors and so on.
| MODEL | SMT-012-042VWP | SMT-024-042VWP | |
| OUTPUT | DC VOLTAGE | 12V | 24V |
| RATED CURRENT | 3.5Amp | 1.75Amp | |
| VOLTAGE RANGE | |||
| RATED POWER | 42Watt | 42Watt | |
| RIPPLE&NOISE(max) | 300mV | 300mV | |
| VOLTAGE TOLERANCE | ±5% | ±5% | |
| LINE REGULATION | ±1% | ±1% | |
| LOAD REGULATION | ±2% | ±2% | |
| INPUT | VOLTAGE RANGE | 100-265VAC | 100-265VAC |
| FREQUENCY RANGE | 47-63Hz | 47-63Hz | |
| POWER FACTOR(Typ.) | |||
| EFFICIENCY(Typ.) | ﹥83% | ﹥84% | |
| AC CURRENT(Typ.) | 0.48A/110VAC, 0.25A/220VAC | ||
| PROTECTION | SHORT CIRCUIT | Protection type:recovers automatically after condition is removed | |
| OVER CURRENT | overload protected@145-160% above peak rating | ||
| OVER VOLTAGE | Protection type:Shut down o/p voltage,re-power on to removed | ||
| ENVIRONMENT | WORKING TEMP. | -10~+50℃ (Refer to output load derating curve) | |
| WORKING HUMIDITY | 20~99% RH non-condensing | ||
| STORAGE TEMP.,HUMIDITY | -40~+80℃,10~99%RH | ||
| SAFETY&EMC | SAFETY STANDARDS | EN61347-1;EN61347-2-13; UL /CE /ROHS approval | |
| WITHSTAND VOLTAGE | I/P-O/P:2KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC | ||
| EMC Test Standards | EN55015;EN61000-3-2;EN61000-3-3;EN61547;EN61000-4-2,3,4,5,6,8,11; | ||
| NOTE | 1.All parameters NOT specially mentoned are measured at 110V,220VAC input,rated load and 25℃ of ambient temperature. | ||
| 2.Ripple&noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf&10uf parallel capacitor. | |||
| 3.Tolerance:includes set up tolerance,line regulation and load regulation. | |||
