DALI Dimmable Driver 60W (Standard Size)
SMT-012-060VM
DALI Dimmable LED Driver
SMARTS
The Dali 12v 60w led driver is excellent compatibility with a series of dimmers for flicker free lighting. this series from 30W to 200W is with better lighting design solution and better dimming ef...
The Dali 12v 60w led driver is excellent compatibility with a series of dimmers for flicker free lighting. this series from 30W to 200W is with better lighting design solution and better dimming effect.
| Model | SMT-012-060VM | SMT-024-060VM | |
| Output | DC Voltage | 12V | 24V |
| Voltage Accuracy | ±0.5V | ||
| Rated current | 5.0A | 2.5A | |
| Rated power | 60W | 60W | |
| Input | Voltage Range | 100-265VAC | |
| Frequency Range | 47~63HZ | ||
| Power Factor ( Typ.) | PF≧0.90/110V ; PF≧0.90/220V | ||
| Full Load Efficiency(Typ.) | >88% | >88% | |
| AC Current(Typ.) | 0.69A@110VAC | ||
| Leakage current | ﹤0.70mA/110VAC ; ﹤0.75mA/220VAC | ||
| Protection | Short Circuit | Protection type: Hiccup mode, recovers automatically after fault condition is removed | |
| Waterproof rate | IP67 | ||
| Over Current | ≦1.4*Iout | ||
| Over temperature | 100℃±10℃ shut down o/p voltage, re-power on to recover | ||
| Environment | Working TEMP. | -40~+50℃ | |
| Working Humidity | 20~95%RH,non-condensing | ||
| Storage TEM.,Humidity | -40~+80℃,10~95%RH | ||
| TEMP.coefficient | ±0.03%/℃(0~50℃) | ||
| Vibration | 10~500Hz,5G 12min./1 cycle,period for 72min.each along X,Y,Z axes | ||
| Safety&EMC | Safety standards | EN61347-1 EN61347-2-13 | |
| Withstand voltage | I/P-O/P:3.75KVAC I/P-FG:1.88KVAC O/P-FG:0.5KVAC | ||
| Isolation resistance | I/P-O/P I/P-FG O/P-FG:100MΩ/500VDC/25℃/70%RH | ||
| EMC EMISSION | Compliance toEN55015,EN61000-3-2 (≧50%load) | ||
| EMC IMMUNITY | Compliance to EN61000-4-2,3,4,5,6 ,11,EN61547,A light industry level (surge4KV) | ||
| Others | Weight | 1Kg | |
| Size | 210*69*45mm(L*W*H) | ||
| packing | 355*215*215mm/10pcs/CTN 220*70*50 mm for inner box | ||
| Notes | 1. All parameters NOT specially mentioned are measured at 110V~220VAC input , rated load and 25℃of ambient temperature. | ||
| 2. Ripple& noise are measured at 20MHz of bandwidth by using a 12”twisted pair-wire terminated with a 0.1uf &47uf parallel capacitor. | |||
| 3. Tolerance:includes set us tolerance,line regulation and load regulation . | |||
?
¡ùInput Rubber cable ?H03VV-F 3G 1.0©O£¬the green/yellow cable connect with (FG)£¬Brown with AC (L),Blue with AC(N)
¡ùInput with Live Wire(L) ?Neutral Wire (N)
¡ùOutput LED SEC £¨LED+£©,£¨LED-£©
¡ùSignal Dimming £¨DA1£©, (DA2£© DALI Non polar£¡
