DALI Dimmable Driver 180W (Standard Size)
Smarts led dali driver has acheived ETL and CE/ROHS approval. Garanteed 5 years warranty,This constant voltage dimmable 12v 180w led dali driver Has good waterproof performance, can adapt to outdoor humid environment.
| Model | SMT-012-180VM | SMT-024-180VM | |
| Output | DC Voltage | 12V | 24V |
| Voltage Tolerance | ±0.5V | ||
| Rated current | 0 - 15A | 0 - 7.5A | |
| Rated power | 180W | 180W | |
| Input | Voltage Range | 100-265VAC | |
| Frequency Range | 47 - 63HZ | ||
| Power Factor | PF≧0.90/120VAC PF≧0.90/230VAC PF≧0.90/265VAC(Full loading) | ||
| Full Load Efficiency(Typ.) | >88% | >88% | |
| AC Current(Max.) | 1.72A | 0.86A | |
| Leakage current | <0.5mA | ||
| Protection | Short Circuit | Protection type: Hiccup mode, recovers automatically after fault condition is removed. | |
| Over Load | ≤120% | ||
| Over Circuit | ≤1.2*Iout | ||
| Protection Class: | Ⅰ | ||
| Over temperature | 100℃±10℃ shut down o/p voltage, re-power on to recover | ||
| Environment | Working TEMP. | -40 - +60℃ | |
| Working Humidity | 20 - 95%RH,non-condensing | ||
| Storage TEM.,Humidity | -40 - +80℃,10 - 95%RH | ||
| TEMP.coefficient | ±0.03%/℃(0 - 50℃) | ||
| Vibration | 10 - 500Hz, 5G 12min./1 cycle, period for 72min.each along X,Y,Z axes. | ||
| Safety & EMC | Safety standards | EN61347-1 EN61347-2-13 IP66 | |
| Withstand voltage | I/P-O/P:3.75KVAC I/P-FG:1.88KVAC O/P-FG:0.5KVAC | ||
| Isolation resistance | I/P-O/P I/P-FG O/P-FG:100MΩ/500VDC/25℃/70%RH | ||
| EMC Emission | EN55015,EN61000-3-2 (≥60%load) | ||
| EMC Immunity | EN61000-4-2,3,4,5,6 ,11,EN61547,A light industry level (surge4KV) | ||
| Others | Weight | 1.6Kg | |
| Size | 256*78*47mm(L*W*H) | ||
| packing | 305*295*210mm/10pcs/CTN | ||
| Notes | 1. All parameters NOT specially mentioned are measured at 110VAC, 230VAC input , rated load and 25℃of ambient temperature. | ||
| 2. Tolerance: includes set us tolerance, line regulation and load regulation . | |||
| 3. The power supply is considered as a component that will be operated in combination with final Equipment. Since EMC performance will be affected by the complete installation, the final equipment manufactures must be-qualify EMC Directive on the complete installation again. | |||
?
¡ùInput Rubber cable H05RN-F 3G 1.0mm2,the green/yellow cable connect with (FG) ,Brown with AC (L),Blue with AC(N)
¡ùSignal Rubber cable H05RN-F?2*0.75mm2,Blue and White is DA1,?DA2?(No?polar). Connected to the BUS of the DALI Master.
¡ùOutput rubber cable :1 group of H05RN-F 2*1.5mm2?for SMT-024-150VM; 2 group of 2*1.5mm2?for SMT-012-150VM,?Red is output?( V+) Positive,Black is output?(V-) negative. Connected to LED Lamps.
Please make sure you connect these correctly otherwise your product will not function correctly and could be damaged.
