5 in 1 Dim J-BOX LED Driver 120W
SMT-012-120VTDHV2
5 in 1 Dimmable LED Driver
SMARTS
This led driver 0 10v dimming and triac dimming operates flawless dimming, up to 20KHZ, which is ideal for projects in North American. 12V 24V strips lights is one of the options for your choosing....
This led driver 0 10v dimming and triac dimming operates flawless dimming, up to 20KHZ, which is ideal for projects in North American. 12V 24V strips lights is one of the options for your choosing.
| model | SMT-012-120VTDHV2 | SMT-024-120VTDHV2 | |
| Output | DC Voltage | 12V | 24V |
| Voltage Regulation | ±0.5% | ||
| Rated current | 10.0A | 5.0A | |
| Voltage Tolerance | ±0.5V | ||
| Load Regulation | ±2% | ±2% | |
| Rated power | 120W | 120W | |
| Input | Voltage Range | 100-277VAC | |
| Frequency Range | 47-63Hz | ||
| Power Factor@ full load | 0.99@120VAC 0.96@277VAC | 0.98@120VAC 0.95@277VAC | |
| THD(Typ.)@ full load | <20% | ||
| Efficiency(Typ.)@ full load | 82% @120Vac 83%@277Vac | 82% @120Vac 84%@277Vac | |
| AC Current(Max.) | 1.7A@100Vac | ||
| Inrush Current (Typ.) | 20A, 50%, 1.6ms @120Vac 25A, 50%, 1.2m,s @277Vac | ||
| Leakage current | <0.50mA | ||
| protection | Short Circuit | shut down o/p voltage, re-power on to recover after fault condition is removed | |
| Over Loading | ≤120% constant current limiting, auto-recovery | ||
| Over temperature | 100℃±10℃ shut down o/p voltage, automatically recover after cooling. | ||
| Environment | Working TEMP. | -40~+60℃ (see below derating curve) | |
| Working Humidity | 20~90%RH, non-condensing | ||
| Storage TEMP. Humidity | -40~+80℃,10~95%RH | ||
| TEMP .coefficient | ±0.03%/℃(0~50℃) | ||
| Vibration | 10~500Hz, 5G 10min./1 cycle,period for 60min. each along X,Y,Z axes | ||
| Safety&EMC | Safety standards | UL8750+UL1310 | |
| Withstand voltage | I/P-O/P:1.88KVAC | ||
| Isolation resistance | I/P-O/P:100MΩ/500VDC/25℃/70%RH | ||
| EMC EMISSION | FCC Part 15 B | ||
| Others | Weight | About 1.3Kg | |
| Size | 220*94.5*40mm (L*W*H) | ||
| packing | 10PCS/CTN (L*W*H) | ||
| Notes | 1. All parameters if NOT specially mentioned are measured at 120VAC input , rated load and 25℃of ambient temperature. | ||
| 2. To extend the driver's using life ,please reduce the loading at lower input voltage. | |||
- Inputwire Black and White to be connected?to?AC?L and N ,Green wire go ground,
- Outputwire?Red to LED Positive side (+) , Black ?to LED Negative side (-).??
- Dimming cable DIM (+) Purpleto 0/1-10V dimmer signal(+ ),DIM (-) Grey?to 0/1-10V dimmer signal (-) ?
- Please make sure your connect these correctly otherwise your product will not function correctly and could be damaged.
¡ö?Connecting Diagram
Using TRIAC/Phase cut dimming
1.The Pulse-Width Modulation (PWM) of output voltage can be adjusted through input terminal of the AC phase line(L) by connection a phase /Triac dimmer of lighting system.
2.Work with forward phase /leading edge ,MLV and?reverse phase /trailing edge ,ELV,TRIAC dimmers.
3.Please try to use dimmers with power at least 1.5 times as the output power of the driver.
?Using 0-10/1-10V dimming
?
