277V 0-10V Dim Driver 150W(Standard Size)
SMT-012-150VDHW
0-10V Dimmable LED Driver
SMARTS
Smarts Waterproof 0 10v led driver transformer 24v 150w With smooth dimming function, no flicker, good energy-saving effect, compatible with a variety of dimmers. With a 7-year warranty,
Model...
Smarts Waterproof 0 10v led driver transformer 24v 150w With smooth dimming function, no flicker, good energy-saving effect, compatible with a variety of dimmers. With a 7-year warranty,
| Model | SMT-012-150VDHW | SMT-024-150VDHW | |
| Output | DC Voltage | 12V | 24V |
| Voltage Accuracy | ±0.5V | ||
| Rated current | 0~12.5A | 0~6.25A | |
| Rated power | 150W | ||
| Input | Voltage Range | 100-305VAC (110, 277VAC) | |
| Frequency Range | 47~63HZ | ||
| Power Factor ( Typ.) | PF≧0.96/110V / PF≧0.96/220V / PF≧0.98/277V | ||
| Full Load Efficiency(Typ.) | >91%(110V) / >95%(277V) | >90%(120V) / >92%(277V) | |
| AC Current(Typ.) | 1.43A(120V) / 0.93A(277V) | 1.39A(120V) / 0.90A(277V) | |
| Leakage current | ﹤0.8mA/120VAC / ﹤0.7mA/220VAC / ﹤0.7mA/277VAC | ||
| Protection | Short Circuit | Protection type: Hiccup mode, recovers automatically after fault condition is removed | |
| Over voltage | ≦330VAC | ||
| Over temperature | 100℃±10℃ shut down o/p voltage, re-power on to recover | ||
| Environment | Working TEMP. | -40~+50℃ | |
| Working Humidity | 20~95%RH,non-condensing | ||
| Storage TEM.,Humidity | -40~+80℃,10~95%RH | ||
| TEMP.coefficient | ±0.03%/℃(0~50℃) | ||
| Vibration | 10~500Hz,5G 12min./1 cycle,period for 72min.each along X,Y,Z axes | ||
| Safety&EMC | Safety standards | Class P, Type HL, EN61347-1 EN61347-2-13.IP67 | |
| Withstand voltage | I/P-O/P:3.75KVAC I/P-FG:1.88KVAC O/P-FG:0.5KVAC | ||
| Isolation resistance | I/P-O/P I/P-FG O/P-FG:100MΩ/500VDC/25℃/70%RH | ||
| EMC EMISSION | Compliance to EN55015,EN61000-3-2 (≧50%load) | ||
| EMC IMMUNITY | Compliance to EN61000-4-2,3,4,5,6,8,11,EN61547,A light industry level | ||
| Others | Weight | 1.8Kg | |
| Size | 255*80*53mm(L*W*H) | ||
| packing | 440*295*145mm/8pcs/CTN 265*98*55 mm for inner box | ||
| Notes | 1. All parameters NOT specially mentioned are measured at 110~277VAC input , rated load and 25℃of ambient temperature. | ||
| 2. Ripple& noise are measured at 20MHz of bandwidth by using a 12”twisted pair-wire terminated with a 0.1uf &47uf parallel capacitor. | |||
| 3. Tolerance:includes set us tolerance,line regulation and load regulation . | |||
